New Projects
We are constantly developing new designs. Research on each design starts with the development of conceptual technical drawings and assumptions. Based on them, we develop models to optimise each piece of furniture and its possible alternatives.
PROPE The propeller-like base made of barrel staves resembling a propeller. The square top is made of barrel lids. Glass is fixed inside it. The top of 150x150 cm. The table is 75 cm high. |
|
TITAN The top made of an old oak rafter. It is 2 m long, 1 m wide, 10 cm thick. Table legs are 8 asymmetrically arranged old rafters of different thickness. The table base is a 7 cm-thick oak board. |
|
TRAPE The top made of 15 mm-thick square glass of 1.5x1.5 m. The table base is made of old rafters forming a trapezoid duo. |
|
MATRIOSH Two flower-like structures arranged together – the smaller structure inside the larger one. The table is made entirely of 400 l-barrel elements. The table base is made of a 400 l-barrel lid. The larger glass top is 150 cm, while the smaller one – 70 cm in diameter. |
|
20 BLATES An arrangement of 18 tops made of old wood. The tops are set vertically and fixed perpendicularly to each other to form a filter-like structure. They are 2 cm thick. They differ in surface, the largest top covers 70 cm2, while the smallest one – 30 cm2. The table base is a 10 cm-thick horizontal top to which the entire structure is fixed. The main top is 2 cm-thick square glass of 1.5x1.5 m.
|
|
MANHATTAN II The table made of asymmetrically arranged old pine rafters which resemble an urban development plan or a maze. The table has two tops – the main one of 2x1 m and the bottom one of 1.5x0.7 m. Both tops are made of old oak wood. Glass windows are fixed inside them.
|
|
DUET The table top made of barrel lids of 2x1 m. The glass window of 1.5x0.6 m fixed inside the top. The table base made of alternating barrel staves; two open crate structures.
|
|
MANHATTAN III The table made of old wood. It has three square wooden tops of 0.9x0.9 m. The table is 0.7 m high.
|
|
PANS The rack made of old wood. 17 rhombi arranged together.
|
|
BOXES The wall rack made of old pine wood.
|
|
FAC The rack made of barrel elements. It can hold 15 bottles of wine.
|
|
ROTO The square table of 0.7x0.7 m. The top made of 15 mm-thick glass. The table base made of ten barrel staves oriented at 36 degrees to each other. The structure resembles a crankshaft or a rotor. The bottom table top made of old wood. |
|
THRONE II The throne-like chair made of old oak wood. Upholstery is natural – made of jute. The back cushion held by thin metal rods.
|
|
ARC The chair made of barrel elements. The seat upholstered. The chair structure exposes curvatures of barrel staves. |
|
SPAD The chair made of old pine wood. The seat upholstered with natural jute. |